Service Call Errors - Canon i900D Service Manual

Hide thumbs Also See for i900D:

Quick start manual (68 pages)

Printing manual (50 pages)

Setup instructions (2 pages)

Table Of Contents

Table of Contents

2.2 Service Call Errors

- LED Blinking in Orange and Green Alternately, or Lit in Orange

- LCD viewer displaying error codes

LED

alternate blinking

in orange and

green

2 times

3 times

4 times

6 times

7 times

8 times

9 times

10 times

12 times

13 times

15 times

Continuous

alternate blinking

Lights in orange

*1: Before replacement of the logic board ass'y, check the waste ink amount (by service test print or EEPROM

information print). If the waste ink amount is 7% or more, also replace the bottom case unit (QM2-0586) or

the 5-item set of the ink absorbers (QC1-2232/2233/2234/2235/2236) when replacing the logic board ass'y.

See Section 3.3. Adjustment / Settings, (6) Service mode, for details.

*2: Only for models supporting CD-R printing (i905D only).

*3: Reset the waste ink counter when replacing the bottom case unit (QM2-0586).

/ Settings, (6) Service mode, for

Error

Carriage error [5100]

Paper feed error [6000]

Purge unit error [5C00]

Internal temperature

error [5400]

Waste ink absorber full

[5B00]

Print head temperature

rise error [5200]

EEPROM error [6800]

Carriage lift mechanism

error [5110]

Media sensor error

[8000]

USB Host VBUS

overcurrent [9000]

Other hardware error

[6500]

Flash ROM error

RAM error

details.

(Replacement of listed parts, which are likely to be faulty)

- Carriage unit (QM2-0662)

- Timing slit strip film (QA4-1053)