Using The Ptz Menu (Local Dvr) - Lorex LHD200 Instruction Manual

To enter PTZ camera settings in the DVR:
1 Right-click to open the Menu Bar and click the Main Menu button (
password.
2 Click Device and select the PTZ tab.
3 Configure the following according to your PTZ
camera's specifications:
• Channel: Select the channel the PTZ camera
is connected to.
• Protocol: Select from Pelco-D or Pelco-P.
• Baud rate: Select the PTZ camera's baud rate.
• Data Bit: Select from 5~8 data bits.
• Stop Bit: Select from 1 or 2 stop bits.
• Parity: Select from None, Odd, Even, Mark
or Space.
• Cruise: Select Enable to enable PTZ cruise.
• Address: Enter the PTZ camera's address
Use the Copy To drop-down menu to copy the
PTZ settings to multiple channels.
4 Click Apply to save your settings.

Using the PTZ Menu (Local DVR)

To control the PTZ camera locally on your DVR:
1 Select the channel that the PTZ camera is connected to.
2 Press and hold the PTZ button on the front panel of the system for 6 seconds. Enter the
system password. The PTZ menu opens.
Appendix B: Connecting a PTZ Camera
). Enter the system
PTZ button
Press and hold for 6 seconds
103