Christie DS+8K-J Brochure & Specs page 11

Fog filter
CT lens mount
Fog filter options
To help extend the life of your projector and
protect your investment, optional fog juice
filters are available for environments that
require more than the protection of our
dust-sealed engine.
The design of the fog juice filter kits –
attached to the projector – reduces the
affects of the oil or juice created by fog,
smoke, hazers and pyrotechnics. These kits
include easy-to-install external media mounts
and one set of filters (internal and external).
The life of the filters depends on the amount
of bi-product captured, but they typically can
last up to 20 hours.
Serviceability and support
All Christie 3-chip DLP ® projectors ship
standard with a three year warranty on parts
and labor (including light engine).
1 CT refers to the suite of lenses available for use with Christie's legacy Xenon platform. Note: ILS capabilities are not available with CT lenses and lens mount.
Legacy input cards are not compatible with J Series models.
2
legacy compatibility
Lenses The ILS lens adapter kit enables you to convert your existing CT
The conversion kit includes complete instructions and allows you to make the change in the field.
Christie J Series models can be shipped with a CT
to continue using existing CT lenses.
Lamps Legacy Xenon lamp modules are compatible with the Christie J Series projectors, but lamp hour tracking functionality
will not be enabled.
The new lamp modules for the Christie J Series will also work with legacy Xenon models e.g. 1.0kW lamp for a Christie
DS+8K-J projector can be used in a Christie DS+6K projector. These lamp modules, with lamp memory cards, contain a
serial number and hours of use information to make inventory and usage tracking quick and easy in all Christie J Series
projectors. Lamp hour tracking capabilities are not enabled in legacy models.
Input cards The input cards used in Christie M Series projectors are also compatible with Christie J Series models.
2
Rigging and Customers with existing stacking mounts and hardware can use the same equipment with the Christie J Series models.
stacking
Environmental commitment
We recognize our responsibility to control
the impact our business activities, products
and services have on the environment.
We're fully committed to finding and
using environmentally friendly solutions,
and to meeting or exceeding applicable
laws, regulations and organizational
objectives. You'll notice that the Christie
J Series includes features that support
our commitment to being eco-friendly. As
an industry leader, we are committed to
the prevention of pollution and continual
improvement through implementation of
our ISO14001 registered environmental
management system.
Efficiency
The lamps used in Christie J Series
projectors produce the highest lumens
per watt, enabling brighter images without
additional power requirements. As well,
liquid cooling with the thermal feedback
system in the Roadster models, improves
performance and enables the projectors
lenses to function with Christie J Series projectors.
1
lens mount option (must be specified at time of purchase) to allow you
1
to run cooler in harsh environments,
using less power to keep the DMDs cool.
DLP ® projectors offer higher brightness
from smaller units and consequently use
less power to achieve the same levels of
brightness.
Auto shut-off and eco mode
Reduce your cost of ownership by reducing
power consumption and extending lamp
life when the projector isn't being used.
These projectors can run in eco mode, which
reduces brightness and therefore reduces
your power requirements and extends
the life of your lamp. A reduction in the
projector's thermal output minimizes energy
use and possible air-conditioning needs.
Low power standby modes
Standby power consumption (phantom
power draw) is less than 30W.
Bare bulb replacement
You can replace lamps instead of the
entire lamp module assembly, reducing
unnecessary waste and extra shipping
requirements.
10