3-11. BASE UNIT (DVBU14)
2 four screws
(BTTP M2.6)
3 two hooks
3-12. TRAY (SUB)
1 Rotating the pulley (LD), shift the slider (selection) in the arrow A direction.
2 Rotating the pulley (mode) in the arrow direction, adjust the tray (sub) to be removed.
3 Rotating the pulley (LD), shift the slider (selection) in the arrow B direction.
4 Rotating the pulley (mode) in the arrow direction, remove the tray (sub) to be removed.
4 magnet assy
pully (LD)
stocker section
tray (sub)
1 connector
(CN710)
6 base unit
(DVBU14)
A
B
HCD-FLX5D/FLX7D
5 two screws
(PTPWH M2.6)
slider (selection)
pully (mode)
17