Usb Application; Usb General Settings - Draytek Vigor 3200 Series User Manual

4 . 1 4 U S B A p p
4 . 1 4 U S B A p p
USB diskette connected on Vigor router can be regarded as a server. By way of Vigor router,
clients on LAN/WAN can access, write and read data stored in USB diskette with different
applications. After setting the configuration in USB Application, you can type the IP address
of the Vigor router and username/password created in USB Application>>USB User
Management on the client software. Then, the client can use the FTP site (USB diskette) or
share the Samba service through Vigor router.
4 . 1 4 . 1 U S B G e
4 . 1 4 . 1 U S B G
This page will determine the number of concurrent FTP connection, default charset for FTP
server and enable Samba service. At present, the Vigor router can support USB diskette with
formats of FAT16 and FAT32 only. Therefore, before connecting the USB diskette into the
Vigor router, please make sure the memory format for the USB diskette is FAT16 or FAT32.
It is recommended for you to use FAT32 for viewing the filename completely (FAT16 cannot
support long filename).
Available settings are explained as follows:
Item
General Settings
Vigor3200 Series User's Guide
l i c a t i o n
l i c a t i o n
n e r a l S e t t i n g s
e n e r a l S e t t i n g s
Description
Simultaneous FTP Connections - This field is used to
specify the quantity of the FTP sessions. The router allows up
to 6 FTP sessions connecting to USB storage disk at one time.
Default Charset - At present, Vigor router supports several
types of character sets.
304