Draytek Vigor 3200 Series User Manual page 59

7. To make any two of VLAN groups linked with each other, just check the boxes of the
ones in the field of Inter-LAN Routing in the page of LAN >> General Setup. Refer to
the following figure. LAN2 and LAN3 are linked.
Configuration for VigorSwitch G2240
1. Open Vlan>>Tag-based Group.
2. Add four VID groups. In this case, we can explanation it with Port 15, 16, 17, 18 and
Trunk Port 23.
VLAN Name 3200-VID10, Port Members = 15、23
VLAN Name 3200-VID20, Port Members = 16、23
VLAN Name 3200-VID30, Port Members = 17、23
VLAN Name 3200-VID40, Port Members = 18、23
3. Open Vlan>> Ports and set the VID value with role for each Port:
Port 15 VID = 10 Role = Access
Port 16 VID = 20 Role = Access
Port 17 VID = 30 Role = Access
Port 18 VID = 40 Role = Access
Port 23 VID = 1 Role = Trunk
Port 23 is set with Trunk in this example and will transfer the packets with VLAN Tag
information. That is, packets with VID 10, 20, 30 and 40 will be transferred to
Vigor3200 by Port 23 and VID information will be retained.
49 Vigor3200 Series User's Guide