CASSETTE MECHANISM DISASSEMBLY INSTRUCTIONS
Remove the three 3 screws (VT3-5) and open the cassette
•
tray halfway. After pulling up the XR-H560MD and closing
the tray again, remove it.
•
Perform the azimuth adjustment through the hole on the top
surface.
•
Perform the motor speed adjustment through the hole at the
bottom of the amplifier chassis using the clock screwdriver
"d".
•
The tray of the cassette deck cannot be operated without the
CD board. Open/close the tray with hand.
Azimuth
adjustment
14