Aiwa XR-H560MD Service Manual page 12

5. Remove the two screws (VTT+2-4) A.
Remove the PLATE ASSY, SLIDE L and the PLATE, SLIDE R in the direction of the arrow.
Remove the screw (VW+1.7-5 W/O MFZN2C) B.
Remove the HEAD, OWH RF325-74A.
Re-assembling: Align the axis of the PLATE ASSY, SLIDE L with the arrow mark of the CAM, LOAD.
6. Move the 7ZG-3 A1 in the direction of (a).
While pressing the BOSS in the direction of (b), remove the 7ZG-3 A1 in the direction of (c).
CAM, LOAD
PLATE ASSY,
SLIDE L
b
a
HEAD, OWH RF325-74A
B
A
A
PLATE, SLIDE R
BOSS
b
7ZG-3 A1
c
12