Aiwa XR-H560MD Service Manual page 11

4. Disassembling the elevator block
Remove the screw (UT2+2.6-6 GLD) G and the screw (VTT+2-4) H. Then remove the HLDR, MECHA SUB.
G
HLDR, MECHA SUB
H
Remove the four screws (S-SCREW, MD T) I and remove the ZZG-1 from the HLDR ASSY, MECHA.
I
ZZG-1
I
I
I
HLDR ASSY, MECHA
11