X9SCi-LN4/X9SCi-LN4F/X9SCA/X9SCA-F User's Manual
Reset Button
The Reset Button connection is located
on pins 3 and 4 of JF1. Attach it to a
hardware reset switch on the computer
case to reset the system. Refer to the
table on the right for pin definitions.
Power Button
The Power Button connection is located
on pins1 and 2 of JF1. Momentarily con-
tacting both pins will power on/off the sys-
tem. This button can also be configured
to function as a suspend button (with a
setting in the BIOS - see Chapter 4). To
turn off the power in the suspend mode,
press the button for at least 4 seconds.
Refer to the table on the right for pin
definitions.
Power LED
HDD LED
NIC1 LED
NIC2 LED
OH/Fan Fail LED
PWR Fail
Ground
Ground
2
2-24
Reset Button
Pin Definitions (JF1)
Pin#
3
4
Power Button
Pin Definitions (JF1)
Pin#
Definition
1
Signal
2
+3V Standby
A. Reset Button
B. PWR Button
LED_Anode+
LED_Anode+
LED_Anode+
LED_Anode+
UID-LED
LED_Anode+
Reset
Reset Button
Power Button
PWR
1
Definition
Reset
Ground
A
B