Table of Contents
Advertisement
Comp.].
Troubleshooting
The image is blurred.
Activate the SteadyShot function by pressing the shutter button halfway down and then shoot
images.
The picture was taken in a dark location without the flash, resulting in product-shake. The
use of a tripod or the flash is recommended. [Hand-held Twilight] and [Anti Motion Blur] in
[Scene Selection] are also effective in reducing blur.
Troubleshooting
The LCD screen darkens after a short period of time
passed.
If you do not operate the product for a certain period of time, the product switches to the
power-save mode. The product exits power-save mode when you perform operations such
as pressing the shutter button halfway.
Troubleshooting
The flash takes too long to recharge.
The flash has been fired in succession in a short period. When the flash has been fired in
succession, the recharging process may take longer than usual to avoid overheating of the
camera.
Troubleshooting
Images cannot be played back.
Troubleshooting
Troubleshooting
Troubleshooting
Troubleshooting
Shooting still images/movies
Shooting still images/movies
Shooting still images/movies
Viewing images
Advertisement
Table of Contents
