The Image Is Blurred; The Flash Takes Too Long To Recharge - Sony Cyber-shot DSC-RX100M3 Instruction Manual

Digital still camera
Hide thumbs Also See for Cyber-shot DSC-RX100M3:
Table of Contents

Advertisement

[263] Troubleshooting

The image is blurred.

Make sure that [SteadyShot] is set to [On].
The picture was taken in a dark location without the flash, resulting in camera-shake. The use of a
tripod or the flash is recommended. [Hand-held Twilight] and [Anti Motion Blur] in [Scene Selection]
are also effective in reducing blur.
[264] Troubleshooting
The LCD screen darkens after a short period of time
passed.
If you do not operate the product for a certain period of time, the product will automatically turn off.
The product turns on again when you press the power button.
[265] Troubleshooting

The flash takes too long to recharge.

The flash has been fired in succession in a short period. When the flash has been fired in succession,
the recharging process may take longer than usual to avoid overheating of the camera.
[266] Troubleshooting
The control wheel does not work.
[Wheel Lock] is on. Hold down the Fn button until the lock is released, or set the [Wheel Lock] to
[Unlock].
[267] Troubleshooting
Troubleshooting
Troubleshooting
Troubleshooting
Troubleshooting
Troubleshooting
Shooting still images/movies
Shooting still images/movies
Shooting still images/movies
Shooting still images/movies
Viewing images

Advertisement

Table of Contents
loading

Table of Contents