The Image Is Blurred - Sony A6300 User Manual

of the filter and improper attachment of the hood, the filter or the hood may partially
appear in the image. The optical properties of some lenses may cause the periphery of
the image to appear too dark (insufficient light). You may compensate for this
phenomenon with [Shading Comp.].
[335] Troubleshooting
The color tones of the image displayed on the
monitor/the viewfinder look unnatural.
[Gamma Disp. Assist] has been activated. Set [Gamma Disp. Assist] to [Off].
[Gamma Disp. Assist] is not working properly. The [Picture Profile] settings are cancelled
when you select other than [Off] for [Picture Effect] or when you use [
Shooting], even if [Gamma] is set to [S-Log2] or [S-Log3]. Therefore, the color tones are
not displayed correctly when [Gamma Disp. Assist] is set to [Auto]. To display the color
tones properly, set [Gamma Disp. Assist] to [Off].
[336] Troubleshooting

The image is blurred.

Make sure that [SteadyShot] is set to [On].
The picture was taken in a dark location without the flash, resulting in camera-shake. The
use of a tripod or the flash is recommended. [Hand-held Twilight] and [Anti Motion Blur] in
[Scene Selection] are also effective in reducing blur.
[337] Troubleshooting
The monitor darkens after a short period of time passed.
If you do not operate the product for a certain period of time, the product switches to the
power-save mode. The product exits power-save mode when you perform operations
such as pressing the shutter button halfway.
Troubleshooting
Troubleshooting
Troubleshooting
Shooting still images/movies
Shooting still images/movies
Shooting still images/movies
Silent