Dots Appear And Remain On The Screen; You Cannot Shoot Images Continuously - Sony ILCE-5000 Help Manual

Shoot the subject at a distance closer than the flash range using the flash.
Light the room and shoot the subject.
Troubleshooting

Dots appear and remain on the screen.

This is not a malfunction. These dots are not recorded.
Troubleshooting

You cannot shoot images continuously.

The memory card is full. Delete unnecessary images.
The battery level is low. Insert a charged battery pack.
Troubleshooting
The image is whitish (Flare)./Blurring of light appears on
the image (Ghosting).
The picture was taken under backlit conditions, and excessive light has entered the lens.
Attach a lens hood.
Troubleshooting
The corners of the picture are too dark.
If any filter or hood is used, take it off and try shooting again. Depending on the thickness of
the filter and improper attachment of the hood, the filter or the hood may partially appear in
the image. The optical properties of some lenses may cause the periphery of the image to
appear too dark (insufficient light). You may compensate for this phenomenon with [Shading
Troubleshooting
Troubleshooting
Troubleshooting
Troubleshooting
Shooting still images/movies
Shooting still images/movies
Shooting still images/movies
Shooting still images/movies