Table of Contents
Advertisement
4. Press and hold the shutter button for the duration of the shooting.
As long as the shutter button is pressed, the shutter remains open.
Note
Since the shutter speed becomes slow and the camera-shake tends to occur more easily, it
is recommended that you use a tripod.
The longer the exposure time, the more noise will be visible on the image.
After shooting, noise reduction will be done for the same amount of time that the shutter was
open. However, you cannot shoot any more while noise reduction is in progress.
You cannot set the shutter speed to [BULB] in the following situations:
When the [Smile Shutter] function is activated.
When the [Auto HDR] function is activated.
When [Picture Effect] is set to [HDR Painting] or [Rich-tone Mono.].
When the [Multi Frame NR] function is activated.
When the [Drive Mode] function is set to [Cont. Shooting], [Spd Priority Cont.] or [Self-timer(Cont)].
If you use the above functions when the shutter speed is set to [BULB], the shutter speed is
temporarily set to 30 seconds.
Hint
Images shot in [BULB] mode tend to blur. We recommend that you use a tripod or a multi-
terminal-compatible remote commander that has a shutter button lock function (sold
separately).
How to Use
Shooting
Movie
You can adjust the shutter speed or aperture value to your desired settings for recording
movies. You can also check the image angle before shooting.
1. MENU →
2. Press the MOVIE button to start recording.
Press the MOVIE button again to stop recording.
Menu item details
Program Auto:
Allows you to shoot with the exposure (both the shutter speed and the aperture value) adjusted
automatically. The other settings can be adjusted manually.
Selecting a shooting mode
(Camera Settings) → [Shoot Mode] → [Movie].
Advertisement
Table of Contents
