Table of Contents
Advertisement
1. MENU →
(Custom Settings) → [Release w/o Lens] → desired setting.
Menu item details
Enable:
Releases the shutter when no lens is attached. Select [Enable] when attaching the product to
an astronomical telescope, etc.
Disable (default setting):
Does not release the shutter when a lens is not attached.
Note
Correct metering cannot be achieved when you use lenses that do not provide a lens
contact, such as the lens of an astronomical telescope. In such cases, adjust the exposure
manually by checking it on the recorded image.
How to Use
Using shooting functions
S. Auto Img. Extract.
Sets whether or not to save all the images that were shot continuously in [Superior Auto].
1. MENU →
(Custom Settings) → [S. Auto Img. Extract.] → desired setting.
Menu item details
Auto (default setting):
Saves one appropriate image selected by the product.
Off:
Saves all of the images.
Note
Even if you set [S. Auto Img. Extract.] to [Off] with [Hand-held Twilight] selected as the scene
recognition mode, one combined image is saved.
When the [
Auto Obj. Framing] function is activated, two images are saved even if you
set [S. Auto Img. Extract.] to [Auto].
How to Use
Using shooting functions
Setting the other functions of this product
Setting the other functions of this product
Advertisement
Table of Contents
