Setting The Date/Time - Gigaset CX610 ISDN Manual

First steps

Setting the date/time

Set the date/time so that the correct date and time can be assigned to incoming
calls, and so that you can use the alarm.
Please note
Your phone takes the date/time from the ISDN network when you make an
external call.
Date:
31.01.2011
Time:
00:00
Back
¤ Enter the hours and minutes as four-
digit numbers via the keypad
e.g., QM 5 for 07:15 am.
Change the input position with the
control key if necessary.
14
Calls Time
Date/Time
Save
¤ Press the key below
input field.
(If you have already set the date/time,
open the input field via the menu
¢ page 30.)
The submenu Date/Time is shown on the
display.
¤ The active input position flashes.
Enter the day, month and year as an
eight-digit number via the keypad
e.g., 4 Q2Q
for 14/10/2011.
Press the right or left control key
to change the input position, e.g.,
to correct an entry.
¤ Press down on the control key to switch
to the time input field.
§Time§
to open the
Date/Time
Date:
14.10.2011
Time:
00:00
Back Save