Table of Contents
Advertisement
Creating ISDN settings
Diverting calls
A distinction is made between
u Diverting calls internally and
u Diverting calls to an external phone con-
nection.
Divert on an external connection –
CF (Call Forwarding)
When you divert a call, the call is forwarded
to another external connection. Your call
divert settings can be specific to a particular
connection (i.e., for every configured MSN).
v ¤ Ç ¤ Call Divert
A list containing the configured and acti-
vated receive connections (MSNs) for your
phone and Internal is displayed.
¤ Select the receive connection for which
you want to activate or deactivate call
§OK§
divert, and press
¤ You can enter data in the following fields:
Status
Activate/deactivate call divert.
Phone Number
Enter the number to which calls are to be
diverted, and press
a different number for every MSN.
When
Select All Calls / No Answer / When Busy.
All Calls: Calls are diverted immediately
i.e., calls for this MSN are no longer sig-
nalled on your phone.
No Answer: Calls are forwarded when no
one accepts the call within several rings.
When Busy: Calls are forwarded when
your line is busy.
Please note
Diverting calls to your phone numbers
can incur additional costs. Please consult
your provider.
66
.
§Save§
. You can specify
Internal call divert
You can divert all external calls to a handset.
v ¤ Ç ¤ Call Divert ¤ Internal
¤ You can enter data in the following fields:
Activation
Activate/deactivate call divert.
To Handset
Select the internal party.
Ring Delay
If you prefer to have a delay before the
call is diverted, select the length of the
delay (None, 10 sec., 20 sec. or 30 sec.).
§Save§
Press the display key.
Internal call divert is single-stage only, i.e., if
the calls are diverted to a handset that also
has call divert activated, this call divert is not
activated.
Activating/deactivating call
transfer – ECT (Explicit Call
Transfer)
During call swapping you can connect two
external callers (¢ page 31) to each other by
pressing the end call key a. Transferring
the call by replacing the receiver is not sup-
ported by all ISDN exchanges and PABXs.
v ¤ Ç ¤ Transfer (ECT)
¤
§Change§
(³= on)
Advertisement
Table of Contents
