Gigaset CX610 ISDN Manual page 20

Setting up the phone – installation wizard
u Send connections are the numbers (MSNs) that are sent to the called party. The
network provider calculates charges based on the send connections. You can
assign a fixed MSN as a send connection to each internal party.
u Every MSN can be both a send and receive connection. You can assign each MSN
to multiple handsets as a receive connection.
After registration/getting started, the handsets are assigned all MSNs as receive
connections. The base number (usually MSN1) is assigned to the devices as a send
connection.
No
INT 1
receives calls for
MSN 1:
MSN 2:
MSN 3:
Change
Press
tion.
Press
18
Connection Assist.
?
Assign connections
to handset
INT 1?
Yes
Receive Connections
12345601
12345602
12345603
OK
§OK§
, skip the next two steps and continue with setting the send connec-
§Change§
to display the following:
¤ Press the display key
want to display or change the set-
tings for the send and receive con-
nections for internal parties (here
INT 1).
¤ Press the display key
want to change to the next internal
party.
The list of receive connections cur-
rently assigned is displayed.
Press the bottom of the control key
i s to scroll through the complete list
if necessary.
¤ Press the display key
want to change the setting for the
receive connections.
¤ Press the display key
not want to change the setting.
§Yes§
if you
§No§
if you
§Change§
if you
§OK§
if you do