Heat Sink - HP EliteBook 8530p Maintenance And Service Manual

Heat sink

Description
Heat sink (includes a heat sink clip and replacement thermal material)
Thermal Material Kits
For use with the Quad Core processor and nVidia graphics card
For use with the Quad Core processor and ATI graphics card
For use with the Dual Core processor and nVidia graphics card
For use with the Dual Core processor and ATI graphics card
Before removing the heat sink, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the keyboard (see
6. Remove the fan (see
Remove the heat sink:
1. Remove the four Torx T82.0x7.0 captive screws (1) and the four Torx T8M2.5×12.0 captive
screws (2) that secure the heat sink to the base enclosure.
2. Lift the right side of the heat sink (1) to disengage it from the graphics card.
Battery on page 45).
Keyboard on page
Fan on page 60).
56).
Component replacement procedures
Spare part number
501116-001
495074-001
495075-001
501117-001
61