Using Computer Setup; Navigating And Selecting In Computer Setup; Restoring Factory Settings In Computer Setup - HP EliteBook 8530p Maintenance And Service Manual

Using Computer Setup

Navigating and selecting in Computer Setup

The information and settings in Computer Setup are accessed from the File, Security, Diagnostics, and
System Configuration menus.
To navigate and select in Computer Setup, follow these steps:
1. Turn on or restart the computer, and then press
message is displayed at the bottom of the screen.
●
To select a menu or a menu item, use the keyboard arrow keys and then press enter, or use
a pointing device to click the item.
●
To scroll up and down, click the up arrow or the down arrow in the upper-right corner of the
screen.
●
To close open dialog boxes and return to the main Computer Setup screen, press esc, and
then follow the on-screen instructions.
NOTE:
keyboard to navigate and make selections in Computer Setup.
2. Press f10
3. Select the File, Security, Diagnostics, or System Configuration menu.
To exit Computer Setup menus, choose one of the following methods:
● To exit Computer Setup menus without saving your changes, click the Exit icon in the lower-left
corner of the screen, and then follow the on-screen instructions.
– or –
Use the arrow keys to select File > Ignore changes and exit, and then press enter.
– or –
●
To save your changes and exit Computer Setup menus, click the Save icon in the lower-left corner
of the screen, and then follow the on-screen instructions.
– or –
Use the arrow keys to select File > Save changes and exit, and then press enter.
Your changes go into effect when the computer restarts.

Restoring factory settings in Computer Setup

NOTE: Restoring defaults will not change the hard drive mode.
To return all settings in Computer Setup to the values that were set at the factory, follow these steps:
1. Turn on or restart the computer, and then press
message is displayed at the bottom of the screen.
2. Press f10
You can use either a pointing device (TouchPad, pointing stick, or USB mouse) or the
to enter BIOS Setup.
to enter BIOS Setup.
esc while the "Press the ESC key for Startup Menu"
esc while the "Press the ESC key for Startup Menu"
Using Computer Setup 93