h.
Display assembly (see
i.
Top cover (see
j.
Speaker assembly (see
k.
Modem module (see
l.
System board (see
Remove the ExpressCard assembly:
1.
Turn the system board upside down, with the front toward you.
2.
Remove the four Phillips PM2.0×5.0 screws that secure the ExpressCard assembly to the system
board.
3.
Detach the slots on the ExpressCard assembly from the tabs on the ExpressCard connector (1).
4.
Remove the ExpressCard assembly (2).
Reverse this procedure to install the ExpressCard assembly.
Display assembly on page
Top cover on page
79)
Speaker assembly on page
Modem module on page
System board and system board frame on page
73)
81)
83)
84)
Component replacement procedures
89