Lutcontrol - Toshiba teli BU030 Instruction Manual

LUTControl

This function allows you to apply the
● Registers
Register Visibility
LUTEnable Beginner
LUTIndex Beginner
LUTValue Beginner
● Setting
- Set the activation of LUT
Set the following value to "LUTEnable" register. The setting value is Enumeration type.
- Set the input/output value of LUT
Set the following value to "LUTIndex", "LUTValue" registers. These setting values are Integer type.
"LUTIndex" register value is input level of LUT, and "LUTValue" register value is output level of LUT.
● Note
Copyright © 2013 TOSHIBA TELI CORPORATION, All rights reserved.
LUT(input: 10bit, output: 10bit) to the output images.
arbitrary
Output
luminance
Fig. example of LUT setting
Access
R/W Sets the activation of LUT function.
R/W Sets the input level of LUT.
R/W Sets the output level of LUT.
setting value
OFF (*)
ON
LUTIndex / LUTValue
Minimum (*)
Maximum
64 / 76
Binarization
Input
luminance
Description
function
Inactive
Active
* initial factory setting
setting value
0
1023
* initial factory setting
D4213050G
www.toshiba-teli.co.jp