Imageformatcontrol - Toshiba teli BU030 Instruction Manual

ImageFormatControl

Registers of this category are related to image format control.
● Registers
Register
ImageFormatSelector
● Setting
- Select an image format.
Set a following value to "ImageFormatSelector" register. Setting value is Enumeration type.
● Note
Changing "ImageFormatSelector" register value is invalid during image stream data output.
Binning function is disabled when the camera is running in Scalable mode.
Scalable function is disabled when the camera is running in Binning mode.
Binning mode is available only in B/W models.
Copyright © 2013 TOSHIBA TELI CORPORATION, All rights reserved.
Visibility Access
Beginner R/W Selects an image format.
ImageFormatSelector
Format0 (*)
Format1
Description
Function
Scalable Mode
Binning Mode
* initial factory setting
36 / 76
D4213050G
www.toshiba-teli.co.jp