Rosen Multimedia Navigation System Owner's Manual page 78

2.2.3.630 object types
Your software supports the following 3D object types:
Type
3D terrain map data shows changes in terrain. elevations or depressions in the land
3Dterrall1
when you view the map in 2D, and use it to plot the route map in 3D when you
navigate. Hills and mountains are shown in the background of the 3D map, and
illustrated by color and shading on the 2D map.
Elevated roads
Complex intersections and vertically isolated roads (such as overpasses or bridges)
are displayed in 3D.
Landmarks are 3D artistic or block representations of prominent or well-known
3D landmarks
objects.
3D buildings
3D block representation of full city bUilding data containing actual building size and
position on the map.
2.2.3.7 Elements of the active route
Your software shows the route in the following way
Symbol
Current GPS position and Start
l.l..
point
"' .
Waypoint (intermediate
'~
destination)
\~
Destination (end point)
Route color
Streets and roads that are
excluded from the navigation
Name
Your current position displayed on the map. If roads are
Description
Description
near, it is aligned to the nearest road.
Normally if GPS position is available, the route starts
from the current position. If there is no valid GPS
position, your software uses the last known position as
the start point.
An intermediate destination of the route before reaching
the final destination.
The final destination of the route.
The route always stands out with its color on the map,
both in daytime and in night color mode.
You can choose whether you want to use or avoid
certain road types (page 1). However, when your
software cannot avoid such roads, the route will include
them and It will show them in a color that is different
from the route color.
13