Buttons And Other Controls On The Screen - Rosen Multimedia Navigation System Owner's Manual

7. The initial setup is now complete. The Configuration wizard can be restarted later from the Settings
menu (page 52).
After the initial setup, the Map screen appears and you can start using the software.

2.1 Buttons and other controls on the screen

When you are using the software, you usually tap buttons on the touch screen.
You only need to confirm selections or changes if the application needs to restart, it needs to perform a
major reconfiguration, or you are about to lose some of your data or settings. Otherwise, the software
saves your selections and applies the new settings without confirmation as soon as you use the controls.
Example
Type
I p
Button
Find
.
Button
Viewpoint
/ - "
?~-
.
L~'J
with value
Normal
Icon
Distance
16.9
List
----------
Rout(~ Planning Method
.....
ft
Highways
~ ~ ~ ~ ~
&;"ck ----
o . . .
Tap it to initiate a function, to
open a new screen, or to set a
parameter.
Some buttons display the
current value of a field or setting.
Tap the button to change the
value. After the change, the new
value is shown on the button.
Shows status information.
km
When you need to select from
several options, they appear in a
list.
....
fast
0 "
= ~ ~ ~ ' N ~ ~ ~ _ ~ ~ ~ ~ ~ ~
:
V
Next
Descri ption
4
~ ~ ~
How to use it
Tap it once.
it
Tap once.
Some icons also function as a
button. Tap them once.
Grab the list anywhere and
slide your finger up or down.
Depending on the speed of the
sliding, the list will scroll fast or
slow, only a bit or till the end.
Alternatively, move between
....
pages with the and
buttons and tap the
value that you want.