Map Setiings - Rosen Multimedia Navigation System Owner's Manual

If the selected routing method is not Green, you can have your route compared to
[calculate Green Alternative)
the best green alternative on the screen when confirming the route. If this
alternative is much better than the selected method, you can quickly switch to
:Map
5.2.5 settings
You can fine-tune the appearance of the Map screen. Adjust the map view to your needs, choose suitable
color themes from the list for both daytime and night use, change the red arrow to a 3D car model, show
or hide 3D buildings, turn track logging on or off, and manage you Place visibility sets (which Places to
show on the map).
The map is always shown on the screen so that you can see the effect when you change a setting.
Button
I·
View Mode
I
3D
I)~
Viewpoint
Normal
lit
Colors
Auto
~Jj
Day Map Color
11 . . . . . .
'III
I
Night Map COlor
fIIIJJ
I
3D vehicle Gallery
\' : 1
Landmarks
I
ON
I·:·
Buildings
I
ON
Green mode.
Switch the map view between a 3D perspective view and a 20 top-down view.
Adjust the basic zoom and tilt levels to your needs. Three levels are available.
Switch between daytime and night color modes or let the software switch between
the two modes automatically a few minutes before sunrise and a few minutes after
sunset.
Select the color scheme used in daytime mode.
Select the color scheme used in night mode.
Replace the default position marker to one of the 3D vehicle models. You can
select separate icons for different vehicle types selected for route planning.
Separate icons can be used for car, pedestrian and the other vehicles.
Show or suppress 3D landmarks, 3D artistic or block representations of prominent
or well-known objects.
Show or suppress 3D city models, 3D artistic or block representation of full city
bUilding data containing actual building size and position on the map.
Description
59