Wep Encryption - ZyXEL Communications PLA4231 User Manual

Figure 46 Network > Wireless LAN > Security: No Security
The following table describes the labels in this screen.
Table 19 Network > Wireless LAN > Security: No Security
LABEL
Security Mode
Apply
Cancel

10.5.2 WEP Encryption

WEP encryption scrambles the data transmitted between the wireless stations and the access points
to keep network communications private. It encrypts unicast and multicast communications in a
network. Both the wireless stations and the access points must use the same WEP key.
Your PLA4231 allows you to configure up to four 64-bit or 128-bit WEP keys but only one key can be
enabled at any one time.
Select Static WEP from the Security Mode list.
PLA4231 User's Guide
DESCRIPTION
Choose No Security from the drop-down list box.
Click Apply to save your changes back to the PLA4231.
Click Cancel to reload the previous configuration for this screen.
Chapter 10 Wireless LAN
73