Configuring The Voip Connection; You Will Need - Gigaset N300IP User Manual

Configuring the VoIP connection

Prerequisites for the following steps:
>
You have opened an account with a VoIP provider.
>
The phone and PC are connected to the router and the router is connected to the Internet.
>
A web browser is installed on the PC (Internet Explorer from V7.0, Firefox from V3.5).
>
Any existing firewall allows the PC and the phone to communicate.
You need the VoIP account to be able to make calls to any other subscribers on the Internet, the
fixed line network or the mobile phone network via VoIP.
>
Set up a VoIP account with a VoIP provider.
>
Have your VoIP account data you received from your VoIP provider to hand. You need to save
this data in the phone, e.g. using the Web configurator on your phone.

You will need:

>
Your registration name (login ID), your password and, if applicable (provider-dependent), a user
name (often this is your VoIP phone number).
Or
>
Your personal auto-configuration code (activation code), if your provider supports "automatic
configuration".
>
Instead of using the following procedure, you can also enter the VoIP access data and assign
the VoIP connection as a send and receive connection via a Gigaset C59H, SL78H, SL400H or
S79H handset registered to the base.
>
A description of the Web configurator can be found in the long user guide (see enclosed CD)
and in the Web configurator online help document.
7