Gigaset N300IP User Manual page 13

Configuring the VoIP connection
A web page for configuring the first VoIP connection is displayed.
* ) Automatic configuration:
If your provider supports "automatic configuration", you will receive a "configuration code" instead of an
authentication name and password. Enter this code in the Auto Configuration Code field and click on the Start
Auto Configuration button.
Configuration is performed automatically. Proceed as described under
*
First load the general provider data
onto your base.
>
To do this, click on the Select
VoIP Provider button and then
on the Next> button on the fol-
lowing web page.
>
Click on the list icon and
select the country in which you
are using your phone from the
list.
>
Click on the Next> button
>
Click on the
select your VoIP provider from
the list.
>
Select the Finish button.
If your VoIP provider is not
included in the list, you need to
select Other Provider.
.
8
list icon and
11