Reinstalling The Parts - Maytag mav9750 aww Repair Manual

maytag atlantis washer repair spin bearing thats noisy, diy
STEP 14 reinstalling the parts:
place transmission unit over something soft as not to damage the pulley at the bottom, slide
dome over shaft and line up your relationship marks, bang it down with your hand until the
screw holes match up, attach dome to the leg braces with the bolts, you can attach outer tub
now before replacing unit into machine, or after, putting back those screws that attach the basket
to the dome is hard to do while in the machine, but its possible, that's the way I did it since I have
no back access panel.
so now I have the transmission unit back in the machine, put the springs back on, make
sure springs are properly positioned on the base
file:///D|/Documents%20and%20Settings/DJ/Meus%20documentos/Web/Publicar/p...%20atlantis%20washer%20repair%20spin%20bearing%20thats%20noisy,%20diy.htm (26 of 34) [4/5/2008 19:16:26]