Water Spout - Maytag mav9750 aww Repair Manual

maytag atlantis washer repair spin bearing thats noisy, diy
STEP 4: water spout:
now you will have to move the water spout out of the way, you can disconnect the hoses from
the back of the water inlet valve, which is part of the water spout, and disconnect the wires to
to remove it completely, i didn't, there is one screw holding it in place with a tab on the other side,
I removed the screw and pulled it a little forward, and slid it to my left to move it out of my way,
since the hoses are still attached to it, it is flexible enough to move it around to get the inner tub,
the top ring, and outer basket out
file:///D|/Documents%20and%20Settings/DJ/Meus%20documentos/Web/Publicar/pe...g%20atlantis%20washer%20repair%20spin%20bearing%20thats%20noisy,%20diy.htm (6 of 34) [4/5/2008 19:16:25]