Oce TCS400 Self Support Manual page 25

Features
The EPA E
Sleep mode
The power use of some functions is automatically decreased to save energy.
The printer enters the sleep mode 30 minutes after the last print job is
completed. The key operator can adjust this default time within a range
between 30 and 240 minutes.
It is suggested that you determine the appropriate default time for your work
pattern by changing the setting in steps of 30 minutes and testing each
setting for at least a week. If the limit of 240 minutes still causes sizable
inconvenience, due to your usage pattern, the key operator can disable the
sleep mode.
E
NERGY
Safety information (US)
®
S Criteria for printers involves the following feature:
NERGY TAR
®
S is a U.S. registered mark.
TAR
25