Zone Output Configuration; Relay Programming Mode; Select Relay; Relay Selected - Honeywell NOTIFIER IFS-2600 Technical Installation Manual

Page 32
Once the desired option has been highlighted, pressing the "SELECT" button will select it. Making a selection
or pressing "EXIT" will return to zone selected.
Note: The option previously set is displayed in brackets and is the first to be displayed. Previously
set options will not be displayed if "ALL" is selected.
A function of "BELL" also operates the WARNING SYSTEM.

ZONE OUTPUT CONFIGURATION

Use the "NEXT" & "PREVIOUS" keys to scroll through:
Once the desired option has been highlighted, pressing the "SELECT" button will select it. Pressing "EXIT" at
this stage will return to "Zone Selected".
Note: The option previously set is displayed in brackets and is the first to be displayed. Previously
set options will not be displayed if "ALL" is selected.
A function of "BELL" also operates the WARNING SYSTEM.

RELAY PROGRAMMING MODE

SELECT RELAY #

Use the "NEXT" & "PREVIOUS" keys to scroll through "ALL" "1" "2" "3".
Once the desired relay number has been selected, pressing the "SELECT" button will select it. Pressing
"EXIT" at this stage will return to main menu.

RELAY SELECTED

Use the "NEXT" & "PREVIOUS" keys to scroll through "TYPE" & "MAPPING". Once the desired option has
been highlighted, pressing the "SELECT" button will select it. Pressing "EXIT" at this stage will return to
"Select Relay #".
P/N 10069 ECN08-0066
IFS-2600 Installation & Programming Manual
ZONE #ALL OUTPUT
IBGA BRIG 1&2
INDICATE
I BELL
IB GENERAL
IBG ACF OUT
IBGA BRIGADE 1
IBGA BRIGADE 2
IBGA BRIG 1&2
SELECT RELAY#
(ALL)
RELAY #ALL
(TYPE) MAPPING
Up to 64 and then wrap around.