Appendix B; Zone Output Configurations - Honeywell NOTIFIER IFS-2600 Technical Installation Manual

Page 38

ZONE OUTPUT CONFIGURATIONS

Once a zone has alarmed, its output functions as programmed to one of the following output types.
Type
1 Indicate Only
2 Indicate, Bell
3 Indicate, Bell, General Alarm
4 Indicate, Bell, General Alarm, Ancillary
5 Indicate, Bell, General Alarm, Ancillary, Brigade Relay #1
6 Indicate, Bell, General Alarm, Ancillary, Brigade Relay #2
7 Indicate, Bell, General Alarm, Ancillary, Brigade Relay #1, & Brigade Relay #2
NOTE: A function of "BELL" also operated the WARNING SYSTEM.
Refer to technical specification for descriptions of output types.
The zone can also be programmed to operate one (1) or more relay contacts through the use of the relay
mapping output feature.
P/N 10069 ECN08-0066
IFS-2600 Installation & Programming Manual
Output Description

APPENDIX B