Changing The Led Indicator Setting - Alpine DVA-5205 Owner's Manual

SET UP

Changing the LED indicator setting

34
Changing the LED
indicator setting
Use the following procedure to set whether or
not the product's LED indicators are on or off.
Select "LED INDICATOR" under
"Changing the default settings
(SET UP)" on page 24.
Use the "Joystick" to select the
"ON" or "OFF", then press
"ENT".
ENT
ON
The LED indicators are lit, indicating the
product's operating status. "ON" is selected
upon shipment from the factory.
OFF
The LED indicators are turned off.
When "OFF" is set, the indicators do not light
even when the power is on.
ENT