Changing The Selections After The Program Has Started; Switching The Machine To Standby Mode; Child-Proof Lock - Beko WI 1382 User Manual

•
If the machine is not spinning, the
program may be in rinse hold mode
or the automatic spin correction
system has been activated due to an
excessive unbalanced distribution of
laundry in the machine.
Changing the selections after
the program has started
The selected spin speed and program
temperature fade out. An empty frame
appears.
When the "Program selection" button is
brought to the appropriate position, rpm
and temperature data reappear.
Switching the machine
to standby mode
The machine is switched to standby
mode by pressing "Start/Pause/Cancel"
button momentarily. The Standby symbol
which indicates the machine is in standby
mode lights up and the start symbol that
shows the program has started and is still
continuing fades out.
F2
F1
Selecting or cancelling an auxiliary
function in pause mode
Auxiliary functions can be cancelled or
selected in accordance with the step the
program is at.
Adding/removing laundry in pause
mode
The door can be opened if the water
level is suitable. The door locked symbol
will light up until the door is suitable for
opening. This symbol will fade out as
soon as the door is allowed to open.
Laundry may be added / taken out by
opening the door.
F3 F4
26
Door lock
The Door Locked Symbol lights up when
the loading door is locked. This symbol
will flash until the door is allowed to open.
Do not force the door at this stage. This
symbol will fade out as soon as the door
is allowed to open. You may open the
door after the symbol fades out.

Child-proof lock

Protect the appliance from being
tampered by children by means of the
child-proof lock. In this case, no change
can be made in the running program.
C Your machine can be turned on and
off with On/Off button while the child-
proof lock is activated. In this case,
your machine will resume its program
with child-proof lock activated.
The machine is switched to child-lock
by pressing the 2nd and 4th auxiliary
functions for 3 sec. "C:on" (Child-proof
lock is activated) label appears on the
display.
The same symbol will also be displayed
whenever any button is pressed while the
machine is child-locked.
To deactivate the child-proof lock, press
the 2nd and 4th auxiliary function buttons
for 3 sec.
"C:OFF" (Child-proof lock is deactivated)
label appears on the screen.
EN