Starting The Program; Progress Of Program; Changing The Selections After The Program Has Started - Beko WKB 51031 PT Manual

Ремонт стиральных машин
steps of three hours for the remainder
(1, 2, 3, 6, 9, ...24).
C Do not use liquid detergent when
you set time delay! There is the risk
of staining of the clothes.
1. Open the loading door, place the
laundry inside and fill detergent drawer.
2. Set the washing program, spin speed
and, if required, select the auxiliary
functions.
3. Press "Time Delay" button to adjust
the desired time.
4. Press "Start/Pause/Cancel" button.
The time delay will start to count down.
The ":" in the middle of the displayed
time delay will start flashing.
C More laundry may be loaded during
the time delay period.
5. At the end of countdown process,
":" will light up continuously, "Ready"
light will go off and the relevant program
follow-up light will come on according to
the selected program.
Changing the delay time
If you want to change the time during
the countdown:
1. Press "Start/Pause/Cancel" button.
":" in the middle of the screen will stop
flashing.
2. Press "Time Delay" button to adjust
the desired time delay.
3. Press "Start/Pause/Cancel" button.
4. The ":" in the middle of the displayed
time delay will start flashing.
Canceling the time delay
If you want to cancel the time delay
countdown and start the program:
1. Press "Start/Pause/Cancel" button.
The ":" in the middle of the displayed
time delay will stop flashing.
2. Press "Time Delay" button to
decrease the time delay. "0:00" will
appear on the display.
3. Press "Start/Pause/Cancel" button to
start the program.

Starting the Program

1. Press "Start/Pause/Cancel" button to
http://rembitteh.ru/
start the program.
2. Program follow-up lamp showing the
startup of the program will light up.

Progress of program

Progress of a running program is shown
through the program follow-up indicator.
At the beginning of every program step,
the relevant indicator lamp will light up
and light of the completed step will turn
off. The indicator that is lit up at the far
right of the series of indicator indicates
the step that is being carried out.
C If the machine is not spinning, the
program may be in rinse hold mode
or the automatic spin correction
system has been activated due
to an excessive unbalanced
distribution of laundry in the
machine.
Changing the selections after
the program has started
Turning the program knob while the
program is in a normal flow will not
change the program.
Switching the machine to standby
mode
Press "Start/Pause/Cancel" button
momentarily to switch your machine
to the standby mode. "Start/Pause/
Cancel" lamp will start flashing to
indicate that the machine is switched to
standby mode.
Selecting or canceling an auxiliary
function in standby mode
Auxiliary functions can be cancelled or
selected in accordance with the step the
program is at.
Adding/removing laundry in standby
mode
The door can be opened if the water
level is suitable. "Ready" lamp will
flash until the door is allowed to open.
"Ready" lamp will light up continuously
when the door is allowed to open.
Laundry may be added / taken out by
51
EN
+7 (495) 215-14-41
+7 (903) 722-17-03
http://rembitteh.ru/