Starting The Program; Progress Of Program - Beko WI 1382 User Manual

Time delay
With the "Time delay" function you can
delay the program start up to 24 hours.
Setting can be made in intervals of 30
minutes.
1. Open the loading door, place the
laundry inside and fill detergent
drawer.
2. Set the washing program,
temperature, spin speed and, if
required, select the auxiliary functions.
3. Press "Time delaying" buttons "+"
and "-" to set your desired time delay.
The Time delaying symbol will flash.
4. Press "Start/Pause/Cancel" button.
Then the time delay starts to count
down. The Time delaying symbol will
light up. The Start symbol will light up.
The ":" in the middle of the displayed
time delay will start to flash.
•
More laundry may be loaded or taken
out during the time delay period. At
the end of the time delay countdown
process, time delaying symbol
fades and the washing starts as the
program duration is displayed.
Changing the delay time
If you want to change the time during the
countdown:
1. Press "Start/Pause/Cancel" button. "
: " in the middle of the screen will stop
flashing. The Standby symbol will light
up. The Time delaying symbol will
flash. The Start Symbol will fade.
2. Press "Time delaying" buttons "+" or
"-" to set your desired time delay.
3. Press "Start/Pause/Cancel" button.
The Time delaying symbol will light
up. The Standby symbol will fade.
The Start symbol will light up.
4. The ":" in the middle of the displayed
time delay will start to flash.
Cancelling the time delay
If you want to cancel the time delay
countdown and start the program
immediately:
1. Press "Start/Pause/Cancel" button.
The ":" in the middle of the displayed
time delay will stop flashing.
2. Start symbol will fade. The standby
symbol and the time delaying symbol
will flash.
3. Press time delaying button "-" to
decrease the desired time delay.
Program duration after 30 minutes
shall be displayed.
4. Press Start/Pause/Cancel Button to
start the program.

Starting the Program

1. Press Start/Pause/Cancel button to
start the program.
2. The start symbol which indicates that
the program has started will light up.
3. The door locks and the door locked
symbol will light up.
4. The Symbol of the relevant step
(prewash, main wash, rinse, softener
and spin) that the program has
started from will light up.

Progress of program

The progress of a running program is
shown through a number of symbols on
the screen.
•
At the beginning of each program
step, the relevant symbol in the series
of symbols will light up and thus, at
the end of the program, all symbols
will remain lit up. The symbol that
lights up at the far right of the series
of symbols indicates the step that is
being carried out.
Pre-wash
When "prewash" auxiliary function is
selected, prewash symbol will light up to
indicate the beginning of prewash step.
Main wash
Main wash symbol will light up to indicate
that the main wash cycle has started.
Rinse
Rinse symbol lights up at the beginning of
the rinse step.
Softener
Softener symbol lights up at the
beginning of softener step.
Spin
Spin symbol will light up at the beginning
of the final spin, during "Spin" and
"Pump" special programs.
25
EN