Changing The Selections After Program Has Started - Beko BWM7200X Owner's Manual & Installation Instructions

Selecting a Program and Operating Your Washer
C
CAUTION
• When the End Time selection is completed, the time that appears
on the screen is the total of the end time chosen with the
duration of the selected program.
• Do not use liquid detergents when you activate the End Time
function! There is a risk of staining the clothes.

Changing the selections after program has started

After the programme has started you can make the following changes.
Switching the product to pause mode
Press the Start/Pause button to switch the machine to pause
mode while a programme is running. The light of the step which the
machine is in and Start/Pause starts flashing in the Program Follow-
up indicator to show that the machine has been switched to the
pause mode. Also the ready light blinks until the door is ready to be
opened. When the loading door is ready to be opened, the ready
light will turn off; the program step light and the Start / Pause light will
continue to flash.
Changing the auxiliary function, speed and temperature
Depending on the step the programme has reached, you can cancel
or select the auxiliary functions. See "Auxiliary function selection".
Also you can change the temperature and make cycle adjustments.
See "Temperature selection" and " Spin speed selection".
C
CAUTION
• If no change is allowed, the relevant light will flash 3 times.
Owner's Guide & Installation Instructions
49 / English