DIGITAL VIDEO RECORDER LAYOUT
1. FRONT PANEL
1.
POWER BUTTON
This button turns the unit on or off.
2.
NUMERIC BUTTONS 1 ~16
These buttons have a number of functions to enter data and to make selections. They are used to enter
numerical values when prompted for the password and to make channel/camera selection.
3.
RECORD / STOP / PLAYBACK / STILL
•
RECORD: Start recording
•
STOP: Stop recording or playback
•
PLAYBACK: Start playback of recorded data. By default, the playback starts from the latest recording
on the hard drive. Pressing this button once more during the playback will change the direction of the
playback.
•
STILL: Pause playback
4.
STATUS INDICATOR
Five LEDs display the status of the Digital Video Recorder. From the left, Power, Recording, Network,
Lock, Back up, HDD-1, HDD-2, HDD-3, HDD-4 and HDD-EXT.
5.
USB 2.0 PORT
The USB port is to connect external backup devices such as thumb drive.
6.
DVD-RW
The tray to insert the blank media, CD-R or DVD-R for backup
7.
(2) REMOVABLE HARD DISK BAYS
*Warning: Recording must be stopped before removing HDDs.
8.
DIRECTIONAL BUTTONS / ENTER BUTTON
The directional buttons are used in various ways:
•
Navigate through menus
•
Control PTZ cameras
The Enter button is used on the menu of the DVR.
10
APEX SERIES DVR