Honeywell ADEMCO LYNXR Series Installation And Setup Manual page 24

Data Field Descriptions
Other Programming Commands
✻ 55
ENABLING THE WIRELESS DIALER
Interactive menu mode used for enabling the 5842 Wireless Dialer. Refer to the
Wireless Dialer Mode section for procedure.
✻ 56
ENHANCED ZONE PROGRAMMING MODE
Interactive menu mode used for programming zone attributes and report codes. Refer to the
Enhanced Zone Programming Mode section for procedure.
✻ 80
DEVICE PROGRAMMING MENU MODE
Interactive menu mode for programming Powerline Carrier Devices. Refer to the
Programming Menu Mode section for detailed procedure.
✻ 81
ZONE LISTS FOR MENU MODE
Interactive menu mode for programming zone lists for Powerline Carrier Devices. Refer to the
Zone List Menu Mode section for detailed procedure.
✻ 83
ENHANCED SEQUENTIAL MODE
Interactive menu mode used to enter RF transmitter serial numbers. Refer to the
Sequential Mode section for detailed procedure.
✻ 84
ASSIGN ZONE VOICE DESCRIPTORS
Interactive menu mode used to assign descriptors to each zone. These descriptors will be announced
whenever the system announces an event involving a zone.
✻ 85
RECORD CUSTOM VOICE DESCRIPTORS
Interactive menu mode used to record custom descriptors for use with each zone.
✻ 96
INITIALIZE DOWNLOAD ID AND SUBSCRIBER ACCT. NO. FOR
DOWNLOADING
✻
Pressing 96 initializes the system for downloading.
✻ 97
SET ALL PROGRAM FIELDS TO 1 OF 4 SETS OF DEFAULT VALUES
See Default Tables at the end of this manual.
✻ 98
EXITS PROGRAMMING MODE
Prevents re-entry by: Installer Code + 8 + 0 + 0; allows re-entry only by Power-up, then [
✻ 99
EXITS PROGRAMMING MODE
Allows re-entry to program mode by: Installer Code + 8 + 0 + 0; or by Power-up, then [
–24–
✻
55 Enabling the
✻
56
✻
80 Device
✻
81
✻
83 Enhanced
✻
] and [#].
✻
] and [#].