Zone List Menu Mode - Honeywell ADEMCO LYNXR Series Installation And Setup Manual

Honey security systems installation and setup guide
Hide thumbs Also See for ADEMCO LYNXR Series:
Table of Contents

Advertisement

81 Zone List Menu Mode

While in Program mode, press
lists for output devices (programmed in
NOTES:
• Any list may include any or all of the systems zone numbers.
• A zone list can be assigned to more than one Powerline Carrier Device.
The prompts for *81 are as follows:
81
Zone List Programming ------------------- Main Menu prompt
A 01
Zone List Number --------------------------- for entering the zone list number to be programmed
b
Zone Entry to List --------------------------- for entering zones to the assigned zone list
C
Delete Entire List? -------------------------- for deleting the entire zone list and its contents
d
Delete Specific Zones From List? ------- Selects whether to delete zones or return to next zone list number
E
Delete Zones----------------------------------- for deleting specific zones from the current zone list
The following explains these prompts in detail. The left two columns identify the prompts and list the
available entries. The right-most column provides a further explanation of the entries.
Notes: (1)
Entering a number other than one specified will give unpredictable results.
(2)
Do not assign zones with zone types 20, 21 or 22 to a zone list.
Zone list programming
0 = exit mode
8I
1 = enter mode
Zone list number
01-03 = zone list number to be programmed
A
0I
00 = exit Zone List mode
[✻] = continue
Zone entry to list
b
zz
01-41, 95, 96, 99 = zone numbers to add to
zone list
[✻] = accept zone number and enter the next
zone number
00 = accept zone number(s) and continue to
next prompt
Delete entire zone list?
0 = don't delete; continue to next prompt
C
1 = delete the current zone list
Delete zones from list?
d
1 = continue to delete zones prompt
0 = don't delete; continue to next zone list
number prompt (A....01)
[#] = return to zone list number prompt
(A....01)
Delete zones
Enter each 2-digit zone number to be deleted
E
from the current zone list, followed by the [✻]
key.
[✻] = delete zone and enter next zone to be
deleted
00 = delete zone and return to next zone list
number prompt (A....01) desired
81 to enter Zone List Menu Mode. This mode is used to program zone
80 menu mode) or Chime-by-Zone in Zone List 3.
Pressing 1 advances to the next prompt below.
Pressing 0 exits mode, upon which this prompt blinks, indicating
the mode is inactive.
Enter the Zone List Number 01, 02, or 03 to program (or 00 if no
zone lists are used).
Enter each zone number to add to the zone list by first entering
the zone number, then the [
The system will announce the Voice Descriptor for the selected
zone, if it is programmed. After all desired zones are enrolled,
enter "00" to advance.
To delete the zone list, enter "1". All zones in the zone list will be
deleted automatically and programming will return to the ZONE
LIST NUMBER prompt.
To save the zone list or delete specific zones from the list, enter
"0".
To save the entire zone list, enter "0" and programming will
return to the ZONE LIST NUMBER prompt.
To delete a zone or zones in a zone list enter "1".
When deleting a zone(s) from the zone list, if the selected zone
has a Voice Descriptor programmed, upon deletion it will be
announced as a confirmation that it has been deleted. After all
zones to be deleted are entered, enter "00" to return to the ZONE
LIST NUMBER prompt so that another list can be programmed,
if desired.
–34–
] key (for example, 01
02
03
).

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ademco lynxr-enAdemco lynxr24

Table of Contents