Controls And Connectors - Iiyama ProLite E430 User Manual

CONTROLS AND CONNECTORS

A Power Switch / Power Indicator (
Green:
NOTE
Blue:
Orange: Power Management
B Input / Auto Button (INPUT / AUTO) (ProLite E431S)
Auto Button (AUTO) (ProLite E430 / ProLite E430S)
Input: Select either Analog or Digital for the signal input when both of the signal inputs are
connected to a signal source. Switch D-SUB and DVI-D whenever pressing the input button.
When only one of the two signal inputs is connected to the signal source, the one connected
NOTE
is automatically selected. Input Button is not available if there is no signal input from the
selected connector or during the power management mode.
Auto: Keep pressing the Input / Auto Button for 1-2 seconds.
See page 11 for Auto Set-up.
C Exit / Volume Button (EXIT /
Exit Button (EXIT) (ProLite E430)
D + / Brightness Button ( + /
E – / Contrast Button ( – /
F Menu Button (MENU)
G Headphone Connector
H Speakers
1
*
I AC Connector (AC IN)
J Audio Connector (LINE IN)
K DVI-D 24pin Connector (DVI-D)
L D-sub mini 15pin Connector (D-SUB)
M Keyhole for Security Lock
You can fasten a security lock and cable to prevent the monitor from being removed
NOTE
without your permission.
1
* Available for ProLite E430S / ProLite E431S only
2
* Available for ProLite E431S only
<Front>
)
Normal operation (ProLite E430 / ProLite E430-B / ProLite E430-S /
ProLite E430S / ProLite E431S)
Normal operation (ProLite E430S-B / ProLite E430S-S /
ProLite E431S-B / ProLite E431S-S)
The monitor enters into power management mode which reduces the power
consumption to less than 2W when receiving no horizontal and/or vertical
sync signal.
) (ProLite E430S / ProLite E431S)
)
)
* 1
1
*
* 2
AC IN LINE IN DVI-D D-SUB
<Back>
BEFORE YOU OPERATE THE MONITOR 6