Sensor - Honeywell HRDPX User Manual

Setup

Sensor

______________________________________________________________________________________________
46
Sensor Setup
1. Use the arrow buttons to select Sensor 1 and press ENTER to change
to NO (Normally Open) or NC (Normally Closed).
Repeat for all sensors.
2.
Select SAVE and press ENTER to save settings and exit Sensor Setup.
3.
Relay Setup
1. Use the arrow buttons to select Relay 1 and press ENTER to turn OFF
or ON.
2. Repeat for all relays.
3. Select SAVE and press ENTER to save settings exit Sensor Setup.