Creating A Dvr Connection With Remote Software; Default Remote Software Log In Information - Honeywell HRDPX User Manual

Remote Software
Configuring the DVR Continued

Creating a DVR Connection with Remote Software

Default Remote Software Log in Information

______________________________________________________________________________________________
70
10. Go to SYSTEM > USER CONFIGURATION> CLIENT to add remote users.
Note Only users defined in System > User Configuration > Client will be
able to access the system remotely.
11. Select SAVE to save current settings.
Install the Remote Software on a PC using the disc provided with your
1.
DVR.
Open the Remote Software. The Local Setup window will open
2.
automatically.
Click New.
3.
4. Select HRDP Performance Series as the Site Type.
5. Enter a name for the system in the Site Name box.
6. Enter the IP address of the DVR - found in Network > Network
Configuration on the DVR.
7. Enter the Port number found in Network Client Configuration on the DVR
system (default is 4000).
Click OK.
8.
Enter the user name and password of an authorized remote user as
9.
defined in System > User Configuration > Client on the DVR.
Note User Name and Password are both case sensitive.
10. Click Connect.
The default administrative log in information for the remote software:
User Name: admin1
Password: <none>