R-Signal Button; "R" Button On Private Exchanges; "R" Button And Supplementary Services - Amplicomms BIGTEL 48 Operating Instructions Manual

R-S B
IGNAL UTTON

5 R-Signal Button

You can use the "R" signal button on your telephone on private exchanges
and when using supplementary services provided by your telephone net-
work provider.

5.1 "R" button on private exchanges

If you have connected your telephone to a private exchange, you can use all
the facilities such as call transfer, automatic recall, etc. The "R" signal button
gives you access to these facilities. The FLASH time "100ms" will be requi-
red on a private exchange.
For this purpose, set the "FLASH" switch to the "100ms" setting.
You can find out from the dealer from whom the equipment was purchased
whether your telephone will work on your private exchange without any
problems and what further facilities you will receive from this.

5.2 "R" button and supplementary services

Your telephone supports supplementary services provided by your telepho-
ne network provider, (e.g. brokering, call waiting, three-way conference,
etc.). Many providers work using the "FLASH 300ms" setting.
For this purpose, set the "FLASH" switch to the "300ms" setting.
Please contact your telephone network provider to gain access to the sup-
plementary services (some of which are subject to charge).
22