Short Plug Settings; Printings Singly Using Controller-Equipped Printer - Oki C7400 Maintenance Manual

3.1.3.1 Short plug settings

The SWA board has two short plugs that can be set as follows:
Short Plug (WE1)
Sets flash ROM DIMM to connect WE signals.
(1-2 Short: Disconnects WE signals; 2-3 Short: Connects WE signals.)
Factory 2-3 Short Setting: Re-programmable flash ROM DIMM.
Short Plug (WE2)
(Not use)

3.1.3.2 Printings singly using controller-equipped printer

Menu Map Printing
The program versions, the controller block configuration and other configurations and settings
of the printer are printed.
Operation:
Without HDD: "0"
With HDD:
File List Printing
A list of files stored on a HDD or in ROM is printed.
Operation:
Without HDD: "0"
With HDD:
Font List Printing (PCL)
A list of PCL fonts is printed.
Operation:
Without HDD: "0"
With HDD:
Font List Printing (PS)
A list of PS fonts is printed.
Operation:
Without HDD: "0"
With HDD:
Demo Printing
The demo patterns for destinations stored in ROM are printed.
Operation:
Without HDD: "0"
With HDD:
Ethernet Board Self-Diagnostic Printing
When the printer is equipped with an Ethernet board, holding down the SW on the Ethernet
board for two seconds or more runs self-diagnostics and prints its result.
41316401TH Rev.9
(Press of Switches)
"3" "3"
"0" "0" "3" "3"
(Press of Switches)
"3" "1" "3"
"0" "0" "3" "1"
(Press of Switches)
"3" "1" "1"
"0" "0" "3" "1"
(Press of Switches)
"3" "1" "1"
"0" "0" "3" "1"
(Press of Switches)
"3" "1" "1"
"0" "0" "3" "1"
"3"
"3"
"1" "3"
"1" "3"
"1" "1" "3"
"1" "1" "3"
"1" "1" "1" "3"
Oki Data CONFIDENTIAL
88 /