Changing A Live Set's Tones; Layer On/Off And Volume Adjustment; Switching The Mfx (Multi-Effects); Turning Mfx On/Off - Roland Jupiter-50 Owner's Manual

Editing a Live Set

Changing a Live Set's Tones

Here's how to change the Tones in a Live Set.
1.
In the LIVE SET (UPPER) screen (p . 36), move the cursor to
the tone name and press the [ENTER] button .
The TONE LIST screen will appear.
2.
Select the new tone, and then press the [ENTER] button .
The tone category is shown at the top of the list of tones.
The Tone will change.
MEMO
The SuperNATURAL Acoustic Tone 0028: TW Organ can be
assigned only to layer 1.

Layer On/Off and Volume Adjustment

Here's how to turn each layer on/off or adjust its volume.
1.
In the LIVE SET (UPPER) screen (p . 36), hold down the
[SHIFT] button and press a button from [F1] (LAYER 1)
through [F4] (LAYER 4) .
Layer
By holding down the [SHIFT] button while you press one of the
[F1]–[F4] buttons, you can turn the corresponding layer on/off.
MEMO
Alternatively, you can move the cursor to a layer that you want
to change, and use the value dial to turn that layer on/off.
2.
Move the cursor to a slider and adjust the volume .
58
Status
OFF
ON

Switching the MFX (Multi-effects)

Each Live Set contains four MFX (multi-effects) processors.
The "LIVE SET EFFECTS screen" is used to switch MFX settings.
1.
In the LIVE SET (UPPER) screen (p . 36), press the [F3]
(EFFECT) button .
2.
Move the cursor to the MFX processor that you want to
change, and use the value dial to change the effect type .

Turning MFX On/Off

1.
In the LIVE SET (UPPER) screen (p . 36), press the [F3]
(EFFECT) button .
2.
Press the [F6] (SWITCH) button .
The EFFECT SWITCH window will appear.
3.
Use the [F1] (MFX 1)–[F5] (REVERB) buttons to turn each
effect on/off .
The effect will turn on/off each time you press the corresponding
button.
4.
To close the edit window, press the [F6] (CLOSE) button or
the [EXIT] button .
You'll be returned to the LIVE SET EFFECTS screen.