Roland Jupiter-50 Owner's Manual page 15

Creating a Registration
1.
Use the sound select buttons of each part to select the desired sound .
Upper part
Percussion/Lower part
2.
Specify each part's on/off status and volume setting .
3.
If you want to make more detailed settings, press the [MENU] button
The REGISTRATION screen will appear.
Volume of the registration
Main settings for the
Percussion/Lower Part
4.
Move the cursor to the item that you want to edit, and use the value dial to edit it .
For more about registration editing, refer to "Editing a Registration" (p. 54).
Selecting a Sound for the Upper Part
1.
Press a Live Set button .
A Live Set will be selected.
2.
Once again press the same
Live Set button .
A list of Live Sets will be
displayed.
3.
Turn the value dial to select
a variation, and press the
[ENTER] button .
This allows you to select other
sounds of the selected category.
Solo part
Main settings for the
Upper Part
Main settings for
the Solo Part
Live Set category
Use the sliders to adjust
the volume of each Part.
Turn each Part on/off.
[F1] (EDIT) button
Access the each setting
screen
Live Set name
[F1] (REG) button .
15